How to make a Black Light with LED Launcher Light.
Full photoreview w/ English Info.
Sorry for my translation 😉
No.1 LED Launcher Light
No.3 Magich Light Pen
Alkaline Battery AAA [4 pieces]
You must have these tools, here below:
PS the yellow cutter, without blade.
Unassembling the LED Launcher
Unassemblig the Magic Light Pen
Remove the LED units from the inside by turning the battery part
Cut leaving about 1.5 mm terminals. I will do three pieces of the same process
The welding and LED base
By dissolving (the part that is welded LED) solder the back side of the base LED light launcher, remove the LED that have arrived originally
To the inner-outer blue portion red section view as seen from the table.
Original:
ＬＥＤランチャーライトの基盤裏側のハンダ(ＬＥＤが溶接されている部分)を溶かして、元々着いているＬＥＤを外します
表から見た図(右画像)の赤部を外側・青部を内側とします
Be sure to note the direction of the left, such as the LED image that was taken out of the magic light pen, and then welding with solder, respectively, inside and outside
Attach all three LED’s being removed from the Magic Light Pen …
Original:
マジックライトペンから取り出したＬＥＤを左画像のような向きに注意して、内側・外側をそれぞれハンダで溶接します
マジックライトペンから取り出した３個のＬＥＤを全て取り付けて・・
Black Light Launcher. 🙂
イエローサブマリン ホビー店ブログ