尻切蜻蛉’s kitbash HG 1/144 Gundam Stahlwoge: images, info and credits
From the Modeler:
This Gunpla is based on the concept of “Dilanza turned into a Gundam”
The motif is the four wings of the Kshatriya.
The grooves in the binder are based on the example of Guel’s Dilanza featured in the January 2023 issue of Model Graphix.
The clear parts in the binder are made with commercially available cable ties.
The twin eyes, clear parts, and beam effects are painted with fluorescent water-based hobby colors.
The main body is mainly lacquer in gull gray, peppermint, and graphite black.
The fine grays are made with water-based hobby color German gray.
All colors except matte were painted with a brush.
The beam axe is a combination of the axe included with Dilanza and the beam axe from the HGUC Sinanju.
The beam rifle is a combination of the one from Dilanza and the 30MM, with the lower half and stock being semi-scratch-made out of plastic sheet.
The design was based on the modified Darilbalde composite arms, and I made it into a two-gun rifle with an upper and lower barrel.
This is the state before painting. Details were added using plastic sheet, grooves, and commercially available parts.
Work by @ tonbo_30MM (尻切蜻蛉) on X
